ONSITE & ONLINE AUCTION!
NELSON HARDWOOD LUMBER CO.
305 FREDERICK STREET
PRAIRIE Du CHIEN, WI 53821
WEDNESDAY, MAY 25 9:00 AM CST
Due to the unexpected passing of Kent Nelson, Steve and Brian Nelson have decided to discontinue their successful sawmill and dry kiln operation. They will remain in the log buying and logging operation. This is one of the cleanest, well-maintained sawmill & logging equipment offerings for some time.
DIRECTIONS: From State Hwy 35 on Prairie Du Chien’s north side, take E. Frederick St. West .3 mile.
INSPECTION: The sawmill will be in operation, Tuesday, May 10th – Thursday, May 12th from 8:00 AM – 4:00 PM each day. Interested parties are invited to see the mill in full operation during these times. Inspection of all the equipment will be available Monday, May 23rd & Tuesday, May 24th from 8:00 AM - 4:00 PM.
REAL ESTATE TO BE OFFERED AT 9:00 AM
Approx. 12+ acres w/ large log storage yard and good graveled, truck, trailer, loading and driveway areas.
Approx. 21,500+ sq ft steel-clad pole building with fire suppression sprinkler system throughout. This houses sawmill, debarking, chipping, and grading areas.
Approx. 5600 +/- Sq Ft, 2 story insulated building. File room on top floor w/ shop & breakroom area on main floor.
Approx. 1200 +/- Sq Ft wood construction office building.
Approx. 7350 +/- sq ft steel insulated building w/ 18 +/- side walls, in floor heat, N.G. Boiler & Taylor Wood-fired boiler, overhead insulated doors, currently used as truck repair shop, situated on approx. 3 ½ acres.
Closing on parcels #1 and #2 to be on or before July 15, 2022.
Complete Dry Kiln Operation.
Located at 27133 Sawmill Rd. Richland Center, WI. From Richland Center, take US Hwy 14 east 2 miles to Sawmill Rd then right ¼ mile.
5 – Irvington Moore USNR 50,000 BF each dry kilns. Repaneled & repaired in 2015 w/ 2006 USNR VFD controls (In very good condition)
2006 Hurst 300 HP waste wood boiler w/ water conditioner reclaim tank & controls. Feeder system consists of walking floor storage, vibratory conveyor & stoker – housed in 40” x 80” steel/concrete building.
Kewanee 200 HP natural gas back up boiler w/water conditioner & reclaimer.
3 – Steel air drying buildings; 2 – 36' x 115’; 1 – 36' x 96’ w/ concrete floors & enclosed ends.
2 – Lumber storage buildings: steel clad, wood frame w/ roll-up doors: 1 – 60' x 290’ & 1 – 60' x 100’.
60’ x 40’ Drying stick stacking shed
Planer & Stacking Building
100’ x 120’ steel frame insulated building w/ concrete floor, fully insulated.
Situated on 30.47 +/- acres w/ very nice graveled & fenced yard. There is plenty of room for expansion of buildings.
14 Unit Sawdust/Chip Bin.
EQUIPMENT TO BE OFFERED WITH DRY KILN OPERATION
Newman EPR – 24 Quiet Cut Helical head double sided roughing planer; 6” x 24” capacity, 60hp on top head; 50 hp on bottom head w/ Pinch Roll; s/n 15279.
2’ x 38’ rubber belt infeed conveyor w/ electric drive (Into Newman).
106” x 42’ 4 strand transfer deck w/ C 55B chain, electric drive w/ wood decking.
Mattison 202 straight-line rip saw, Nice; s/n 2367207004.
40” x 10’ outfeed roll table.
Froedge Breakdown & Lumber Stacker
4 strand infeed deck into 3 arm tilt hoist to 5 strand transfer deck into 5 strand unscrambler, into 5 strand H78B rooftop chain deck, into lumber stacker w/ hydraulic package deck w/ power off-feed rolls w/ stick-removing conveyor.
Closing on parcel #3 will not be before October 1, 2022.
REAL ESTATE TERMS: 10% buyers premium. 10% down day of auction in the form of cash, cashier’s check or certified funds. Personal & company checks must have current bank letter of guarantee. Balance is due at closing. Buyer will be provided a Warranty Deed free and clear of all encumbrances and liens subject to all restrictions & reservations of record or by use. Property is being offered subject to owner’s confirmation.
Contact Chad Glaze (Broker) for any real estate questions at (715) 340-6162.
2 – McDonough 6’ Band Mills w/2 Cleereman LP Carriages & Scanners
LEFT HAND MILL
1995 Cleereman LP 42 linear position 16’ carriage, 14” wheels; 6'3" & 4’4” block spacings, 50’ of 60# rail, s/n LP42-533.
Cleereman 30 hp electric/hydraulic power unit w/oil cooler & oil reservoir tank.
2019 Cleereman Linear Carriage controls w/3D 8 head scanning optimizer w/ cameras.
Mc Donough Mod 6-7A. LH band mill; air strain w/slat bed off bearer; s/n 72MA-438.
Approx. 14 New & Used 6’ LH saw blades.
WEG 200 hp electric motor.
Toshiba Mod TE-361 BP 200 hp starter.
Tyrone Berry Mod SMA 250 C-40' shot gun feed works w/100hp electric/hydraulic power unit & oil reservoir.
50 hp electric/hydraulic power unit w/oil reservoir (under cab).
2019 Cleereman 5’ x 8’ cornerless insulated control booth w/ heat & A.C.
Custom Built heavy duty bar type log turner.
10 hp electric/hydraulic power unit w/oil reservoir tank (under steps).
Mellott 24” x 15’ pneumatic slab drop belt w/electric drive.
Mellott 10” x 20’ 3 strand log infeed deck w/ Tulsa Winch; electric drive; hydraulic stop & load (into mill).
Mellot 30”x 45’ x8” power roll case w/ electric drive & 6 arm pneumatic kicker.
Mellott 117” x 27’ 4-strand transfer deck, C118 chain; stops w/ Tulsa Winch, electric drive.
Mellott 80” x 8” 3 strand transfer deck w/ H78B chain w/ Tulsa Winch, electric drive.
RIGHT HAND MILL
1995 Cleereman LP42 linear position 16’ carriage; 14” wheels 6’3” & 4’4” block spacings, 50’ of 60# rail, s/n 42-507.
Cleereman 30 hp electric/hydraulic power unit w/oil reservoir & oil cooler.
2018 Paw-Taw John All Knee Linear Scan Carriage set works w/scanner.
Mc Donough 6-7A R.H. band mill; air strain w/slat bed off bearer; s/n 72MA-275.
Approx. 14 New & Used 6’ bandsaw blades.
WEG 200 hp electric motor.
Toshiba Mod TE – 361 BP 200 hp Starter.
Tyrone Berry Mod SMA 250C – 40’ shot gun feed works w/ 100 HP electric/hydraulic power unit w/ oil reservoir.
40 hp electric/hydraulic power unit w/ oil reservoir (under cab) (Band Mill).
Cleereman 5’ x 8’ cornerless insulated control booth w/ heat & A.C.
Custom Built heavy duty bar type log turner.
10 HP electric/hydraulic power unit w/ oil reservoir (under steps) Runs log turner.
Mellott 24” x 12’ pneumatic slab drop belt w/ electric drive.
Mellott 10’ x 20’ 3 strand log infeed deck w/ Tulsa Winch; electric drive & hydraulic stop & load (into mill).
Mellott 117” x 13’ 4 strand transfer deck, C118 chain; stops; Tulsa Winch; electric drive.
Mellott 30” x 48’ x 8” power roll case w/ electric drive & 5 arm pneumatic kicker.
Precision P636 slant track Rosserhead debarker, 16” capacity; 50hp on head; s/n D 232.
11’ x 48’ 3 strand log infeed deck w/ 4 arm hydraulic stop & load; electric drive.
Patz 17” x 128’ barn sweep bark conveyor w/ 32’ steel chute & electric drive (Clockwise).
55’ WD110 chain log trough outfeed conveyer w/ 2 way 4 arm pneumatic log kickers & 1 way 3 arm pneumatic log kicker w/ Tulsa Winch; hydraulic drive.
15 HP & 10 hp electric/hydraulic power unit w/ oil reservoir & oil cooler.
CROSBY EDGERS & REMAN EQUIPMENT
Crosby 36” board edger w/ 40 hp electric motor; s/n 05307T
Crosby 20’ tailing belt.
Lazer Light & Assembly.
Crosby Size 32 Reman edger w/ 30 hp motor; s/n 12312U.
Baker A single head horizontal band resaw w/ 32’ feed thru belt conveyor.
Alden Multi Rip Saw w/ 60 hp motor & blower.
2 Arm Breakdown hoist (Not Installed).
SAW TRIMMER; GRADING DECK; GREEN CHAIN; TRANSFER DECK; TIE SORTER
Newman Whitney KNO-24 Automatic Selection Overhead Trimmer; 4’ - 16’; 8 saw; s/n 24-040898.
Mellott 117” x 87’ 3 strand green chain w/ Tulsa Winch; electric drive.
Mellott 10’ x 32’ 4 strand grading deck w/ 30” pop up roller (to feed tie sorter) w/ Tulsa Winch; electric drive.
Mellott 24” x 52’ 2 sort tie sorter w/ electric drive.
Mellott 10’ x 21’ 4 strand transfer deck w/ electric drive.
Mellott 10’ x 60’ 4 strand transfer deck; H78A rooftop chain w/ 11’ 4 strand drop transfer deck; electric drive.
36 – steel lumber stacking carts.
CHIPPER & WASTE WOOD HANDLING
Precision 66” chipper; s/n 3010.
250 hp electric motor.
Toshiba TE2 series solid state 250 hp, 450 amp starter.
Precision PCS-77 7’ x7’ chip screen; s/n 2168.
Phelps 48” van loading blower w/ 25 hp motor; 2 Y pipes & diverters; many feet of new pipe.
Approx. 24” x 100’ elevated belt conveyer w/ hopper (for van loading).
Precision 22” x 26’ vibratory conveyor (into chipper).
MDI CR 85 metal detector w/ 4’ fiberglass vibratory section; s/n M4-0416.
Mellott 20” x 65’ belt conveyor w/ electric drive.
2 – Mellott 20” x 45’ belt conveyors w/ electric drive.
Mellott 20” x 42’ belt conveyor w/ electric drive.
Mellott 20” x 29’ belt conveyor w/ electric drive
Mellott 18” x 40’ belt conveyor w/ electric drive.
Patz 16” barn sweep conveyor w/ approx. 360’ of chain; 40' steel chute; electric drive; (counter clockwise).
2015 Gardner Denver Mod EBE 99006F Electra Saver II 30 hp rotary screw air compressor w/ air reservoir tank; 6,276 hours; s/n S467231.
Gardner Denver Mod EBERGH Electra Screw 30hp rotary screw air compressor w/ air reservoir tank, 81,157 hours; s/n U69458.
Gardner Denver Mod EBE99K22 Electra Screw rotary screw air compressor w/ air reservoir tank; 63,100 hours; s/n S054218.
Pneumatech Mod EH-250 regenerative air dryer; s/n 0310-S139606-041892.
Westinghouse Motor Control Center w/ 34 buckets.
Westinghouse 1000 amp 480 volt Switchboard w/ 3 - 250 amp, 1 - 150 am; 1 – 125 amp; 2 – 70 amp; 1 – 60 amp breakers.
Square D 600 VAC 400 amp. 350 hp disconnect.
Plus large amount of assorted disconnects, starters, wire & conduit.
FILE ROOM & SHOP EQUIPMENT
Armstrong automatic electronic leveler; s/n 20755.
Armstrong #4 LH band saw sharpener w/ stands & clamp; s/n 14895.
Armstrong #4 RH band saw sharpener w/ stands & clamp; s/n 14999.
Armstrong #5 stretcher roll; s/n 14938
Armstrong #12 welding clamp.
Armstrong bench w/ anvil.
Hanchett Size 136 circle saw grinder; s/n 815.
Michigan 48 chipper knife grinder; s/n 1078.
Precision 6K 40 tub knife grinder; s/n PAG675.
Miller Synchrowave 180 SD CC/AC/DC Square wave power source TIG welder; s/n LE219695
Miller CP 302 CV/DC welding power source; s/n KH480491 w/ Miller 60 24V constant speed wire feeder.
Mill Rite Mod MVN vertical milling machine; s/n 68539.
Walker Turner radial arm drill; s/n 7-642.
Jet Dia. M 150 horizontal bandsaw.
Clemco Classic 150 PSI sand blaster.
DCE Unimaster dust collector.
Assorted Shop &Mechanic Tools.
BOILER & WALNUT STEAMER
1999 Hurst “Cyclone” 40 hp vertical Natural Gas boiler; Approx. 10K was spent on the boiler in 2021; s/n V150-15-2.
2- kiln doors w/ truck; rack & frame.
PARTS AND ACCESSORIES
Sawmill; Debarker; Chipper; Loader; Truck & Trailer Parts.
Electrical; Hydraulics & Pneumatic Parts
Hardware: Nuts, Bolts, Fasteners.
Large Selection of Steel Cat Walk & Stairs.
WHEEL LOADERS, SKID LOADER, FORKLIFTS
2018 John Deere 624 K-II wheel loader; cab w/ A.C.; JRB Style Q.C.; 20.5R-25 tires; 6450 hours; s/n IDW624KTCJ686934.
2006 John Deere 544 J wheel loader; Cab w/ A.C.; JRB Style Q.C.; 20.5R-25 tires; 15,673 hours; s/n DW544JZ608552.
John Deere 3yd, 104” wide JRB style QC bucket; s/n 180197.
2018 B&D Mod BD600 Silage 6 yd. JRB Style Q.C. bucket; s/n B98196.
Fleco JRB Style Q.C 54” loader forks.
B&D JRB Style Q.C. forks w/ log clamp.
GEM JRB Style Q.C. 4’ forks; s/n 0613-6115-1-1.
Set of 18,000 lb. JRB Style Q.C. forks.
2-11' Hydra Turn Snowplows w/ JRB Style Q.C.
1984 Caterpillar 930 wheel loader; cab w/ heat; 17.5 x 25 tires; pin on bucket & forks; s/n 41K12584
1994 Volvo L70B wheel loader; cab w/ A.C.; 17.5R 25 tires; Q.C.; 23,608 hours; s/n XL70B10444X.
Q.C. 3 yd. Bucket (for Volvo).
Q.C. Log forks w/ clamp; 5’forks (For Volvo).
Mustang 940 E skid loader w/ forks & bucket; 2982 hours, s/n 5478163.
Taylor TYB-180M “Big Red” forklift, cab; 14.00 x 24 front tires, 8' forks; side shift, 6448 hours showing; s/n S-P5-14458.
2000 John Deere 540 G III cable skidder; cab; 23.1 x 26 tires, 10,050 hours showing; s/n DW540GX577684.
1991 John Deere 540E cable skidder; cab; 23.1 x 26 tires, 11,725 hours showing; s/n DW540EC534530.
2 - 1978 & 1979 Caterpillar 518 cable skidders; Gearmatic Winches; 23.1 x 26 tires; 141 & 2935 hours showing; s/n 50S2471 & 50S2674.
Caterpillar 508 cable skidder; 23.1 x 26 tires; 1031 hours showing; s/n 9NC003422.
Several Pair of 23.1 x 26 skidder chains.
1997 Caterpillar D5M XL crawler dozer; Cab; Allied Winch; approx. 7500 hours; s/n D5BXLFTC6GN00393.
LOG LOADER TRUCKS & PUP TRAILERS
2 – 2017 Mack GU 813 tandem axle log trucks; Mack MP8 445 C 12.8 litre engines; Maxi Torque ES 10 speed transmissions; 425/65R 22.5 front float tires; 11R 22.5 drive tires; aluminum wheels; 20,000 front axle; 66,000 rears; air ride cabs; spring suspensions; 2016 Roto Bec Elite 910 knuckle boom loaders w/ sure grip grapples; s/n 050588300-5-1 & s/n 05058300-4-1; 22’ steel log racks w/ aluminum headache racks & aluminum stakes; 164 K & 235 Miles; s/n IM2AX16C0HM038254 & IM2AX16C2HM038255.
2002 Mack CL 713 Maxi Cruise tandem axle log truck; Mack E7 427HP engine; Eaton Fuller 8 LL transmission, 425165R 22.5 front float tires; 11R 22.5 drive tires; aluminum wheels, air ride cab; spring suspension; Roto Bec Elite MT 26 knuckle boom loader w/ Sure Grip grapple; s/n 124334-2-1; 22’ steel log rack w/ aluminum headache rack & aluminum stakes; 123 K miles; s/n IM2AD09C92M012077.
1997 IHC PayStar 5000 SFA 6x6 Pre Hauler truck; Cummins M-11 Plus engine; Eaton Fuller 10 speed transmission; 550/60 - 22.5 rear float tires; Roto Bec Elite Charge Use knuckle boom loader w/ Sure Grip Grapple; s/n 10800520 RO – 6416; 21’ steel log rack; approx. 200K miles; s/n 24TTWAHT9VC017799
2015 Shop Built 2 axle 18’ log pup trailer; 11R 22.5 tires; aluminum wheels, air ride; steel stakes; s/n 100000000013542 WI.
1999 Rosa 2 axle 18’ log pup trailer; 11R 22.5 tires, aluminum wheels, air ride; aluminum stakes; s/n 100237.
1981 Cedar 2 axle 16’ log pup trailer; 11R 22.5 tires, spring ride; steel stakes; s/n 810901.
2004 Mack CX 613 Vision tandem axle sleeper cab truck tractor, 65” sleeper, Mack 427 engine; Eaton Fuller 10 sp trans; 285/75R 24.5 front tires; 285/75R 24.5 drive tires; aluminum wheels; air ride; 489K miles; s/n IMIAE06YX4N020185.
2003 IHC 9100 tandem axle day cab truck tractor; Cat C-12 425 hp engine; Eaton Fuller 10 sp trans; 11R 22.5 front & drive tires; aluminum wheels; air ride; 12,000 front axles; 40,000 rear axles; 365K miles; s/n 2HSCBAXR53C059907.
DUMP & WATER TRUCKS
1989 Mack Econodyne RD 690 S Quad axle dump truck, Mack EM6-300L 300 hp engine; Maxitorque T 2070 7 sp Ext. Range trans; 2 steerable lift axles; 425/65R 22.5 front float tires; 11R 22.5 drive tires; 18’ steel dump body; 446K miles s/n 1M2P198C8KW003979.
1986 International Mod F9370 Eagle tandem axle dump truck; Cat 3406 400 hp engine; Eaton Fuller 15 sp. deep reduction trans; 425/65R 22.5 front float tires; 285/75 R 24.5 drive tires, Northern 22’steel dump box w/ 6’ sides w/ hydraulic end gate; 732K miles; s/n 2HSFBT4R6GCA10317.
1986 Mack RD 685S tandem axle dump truck; Mack 300 HP engine; Maxitorque 7 sp trans; 425165R 22.5 front float tires, 11 R 22.5 drive tires; s/n 1MZP131CIGA011305.
1999 Benson 48’ x 96” aluminum 10’ spread axle flatbed trailer, air ride; bunks and detchable stakes; s/n INUFT28Z7XMNA0032.
1996 Benson 48’ x 96” aluminum 10’ spread axle flatbed trailer, air ride; bunks and detatchable stakes; s/n INUFT28Z0TMNA0190.
1991 Reinke 48’ x 96” aluminum tandem axle flatbed trailer; s/n IRPFA4828L108.
6 PICKUP TRUCKS
2018 Chevrolet 1500 Silverado LT 4x4 Crew cab pickup truck; 5.3 L engine; 128K miles; s/n 1GCUKREC6JF190145.
2014 Chevrolet 1500 Silverado LT 4x4 Double cab pickup truck; 5.3 L engine; 228K miles; s/n 1GCVKREC7EZ118024.
2012 Chevrolet 1500 Silverado LT 4x4 Ext. cab pickup truck; 5.3 L engine; 138K miles; s/n 1GCRKSE71CZ303503.
2012 Chevrolet 1500 Silverado LT 4x4 Ext. Cab pickup truck; 5.3 L engine; 185K miles; s/n 1GERKSE75CZ181812.
2011 Chevrolet 1500 Silverado LT 4x4 Ext. Cab pickup truck; 5.3 L engine; 203K miles; s/n 1GCRKSE33BZ439935.
2009 Chevrolet 1500 Silverado WT 4x4 Reg. Cab pickup truck; 4.3 L engine; 218K miles; s/n 1GCEK14X59Z179772.
Rotobec ¼ yd clam dirt bucket.
Prentice log grapple bucket.
Western 7’ hydra turn plow.
4- 18.4 x 26 skidder tires & rims; 2 w/ chains.
4- 700/40-22.5 float tires w/ rims (fits Mack Truck).
Gear Matic Mod. 19 winch.
10,000 GALLON DOUBLE WALL FUEL TANK
B & H Flameshield FS001345 10,000 gallon double wall fuel tank w/ Petro Vend 100 OPW fuel control system, Gasboy Atlas pump; Cox hose reel & hose.
3 – 6' x 10’ single axle trailers ball hitch, equipped with 100 gallon fuel tanks w/ hand pumps; tool boxes.
Miller Big Blue 400 D welding/generator, Duetz diesel engine; mounted on single axle trailer; 1455 hours; s/n F3L912.
Ingersoll Rand 175 portable air compressor w/ Duetz diesel engine.
Briggs & Stratton 3500 watt gen set.
Wacker gen set w/ Honda 5 ½ gas engine.
Tahoe TI 7000 LXR diesel gen set.
Shorelander 2000 lb. aluminum boat lift w/ canopy frame.
4000# Scissor lift.
3 plastic banding carts w/ tools.
Several circle saw blades.
Band Wheel grinding apparatus.
BIDDERS, PLEASE READ ALL TERMS BELOW!
INTERNET BIDDING: If you are unable to attend this auction in person, simultaneous internet bidding is available via Proxibid. A 13% Buyer’s Premium per lot will be added to internet purchases.
ONSITE BUYERS: A 10% Buyers Premium per lot will be added to the purchase price.
TERMS AND PAYMENT INFORMATION:
Onsite Bidders – A Photo ID is required to obtain a bidder number. Payment may be made by cash or certified funds. Personal and company checks must have current Bank Letter guaranteeing payment to Wausau Sales Corp. (WE DO NOT ACCEPT CREDIT OR DEBIT CARDS). Settlement must be made in full on day of sale and can be made anytime during the sale. Any other arrangements must be made with Wausau Sales Corp. Prior to sale date.
Online Bidders – If you are the winning bidder, an invoice with the wiring instructions will be emailed to you once the sale is completed on Wednesday, May 25, 2022. Settlement must be made before removing any items. Payment must be made in full by 4PM CST on Friday, May 27, 4:00 PM. A Wausau Auctioneers representative will be onsite Thursday, May 26, from 9AM – 4 PM CST for onsite payment collection. Any other arrangements must be made with Wausau Sales Corporation prior to the sale date.
CONDITIONS: Bidders are encouraged to fully examine all items before bidding. While descriptions are believed to be correct and information was obtained from sources deemed reliable, any information contained in the brochure is in no way a guarantee or warranty expressed or implied. Each item in the auction is being sold “AS IS WHERE IS,” without warranty or guarantee of any kind, including merchantability or fitness for a particular purpose. Hour meter and Odometer Reading Published in this listing are not guaranteed, We can only report what is visually seen. Each item is the sole responsibility of the purchaser from the moment the item is sold. Announcements made on auction day take precedence over any printed material. No property is to be removed from the premises before making settlement. All sales are subject to the state Sales Tax law. Wausau Sales is not responsible for accidents.
FINANCING: Available thru Incredible Bank. For pre-approval and financing assistance, contact Adam Keuler @ 715-498-3333.
Registered Wisconsin Auctioneers: Carl Theorin - #135.
Registered Wisconsin Auction #26
4510 County Road L
Merrill, WI 54452
715-536-1955 or 800-432-1922